Representantes

Products Home | Semblex PT^® Home | Pg 2 | Pg 3 | Pg 4 | Pg 5 | Pg 6

Semblex PT^® Thread Forming Screw

THE FASTENER SOLUTION FOR THERMOPLASTICS

30 Degree Thread Angle

Reduces radial stresses
Provides increased thread depth
Lower installation torque
Improves material flow due to high axial component

Optimum Pitch

Resists vibrational loosening
Provides optimum non-reversibility
Balances load ratio between fastener and plastic

Profiled Thread Root

Maximum resistance to relaxation
Improved retention of clamp load
Prevents material jam

Round Cross Section

Even distribution of forces
Elimination of high stress concentrations
Improved resistance to stripping

The ability of the Semblex PT® Screw to reduce and control stresses greatly increases the performance over conventional thread forming screws for plastics.

Products Home | Semblex PT^® Home | Pg 2 | Pg 3 | Pg 4 | Pg 5 | Pg 6

Semblex®, Rolok®, Polyfast®, Plastilok® Plasto-Driv® TriForm®, CaptiForm® and Semblex Square Dome® are registered trademarks of Semblex Corporation. Tapmate™ is a trademark of Semblex Corporation. Torx Plus®, Autosert®, Torx®, Mag-Form®, Strux® are registered trademarks of Acument Intellectual Properties, LLC. CTP™, is a trademark of Acument Intellectual Properties, LLC. PT®, ALtracs®, Delta PT®, Duro-PT® and PT® Type DG® are registered trademarks of EJOT Verbindungstechnik GmbH & Co. KG. Quadrex® and Quadrex® Plus are registered trademarks of Quadrex Consulting, Inc. ACR® Phillips II®, Phillips Square Driv®, Pozidriv®, ACR® Tri-Wing®, and Mortorq®, are registered trademarks of Phillips Screw Co. MAThread® and MATPoint® are a registered trademark of MAThread Inc. Square Cone® is a registered trademark of ITW. Crest Cup ™ is a trademark of Crest Products.

Semblex PT® Thread Forming Screw

Semblex PT^® Thread Forming Screw